Carbon Flex FAQ - FAQ - Nexgen Support

 

 

Q: Can one bottle cover an entire car?

A: Absolutely. Each bottle contains enough product to cover even large vehicles, such as a Suburban.

Q: Is it possible to apply Carbon Flex over other ceramic products?

A: No, Carbon Flex must be applied directly to the paint, ideally after using a panel prep product.

Q: Can Carbon Flex be applied on black trim?

A: Yes, you can apply it on black trim without any issues.

Q: How many ounces are in a bottle?

A: Each bottle contains 1.7 ounces, or 50 milliliters (50ml).

Q: Can this product be applied on glass?

A: Yes, it can be applied to glass surfaces.

Q: Is it suitable for interior use?

A: No, this product is designed exclusively as an exterior protectant.

Q: Do I need to remove NexGen Ceramic Spray before applying Carbon Flex?

A: Yes, for optimal results, it's best to remove the NexGen Ceramic Spray first.

Q: How many cars can one bottle of Carbon Flex cover?

A: One bottle is sufficient for one car, including large SUVs.

Q: Is there a risk of ruining the paint if applied incorrectly?

A: As long as you follow the instructions, there should be no risk of damaging the paint.

Q: Can Carbon Flex be used on a fiberglass boat?

A: One bottle covers 150-300 sq/ft, so it can be used on a boat within this size range.

Q: Can I apply a polish before Carbon Flex?

A: Yes, but ensure you use a panel prep to remove any residues from the polish before applying Carbon Flex.

Q: Is it possible to apply Carbon Flex to a clear wrap?

A: Yes, although it's optimal to apply directly to the paint.

Q: Can Carbon Flex be applied on a vinyl decal?

A: Yes, and it will help in sealing the edges of the decals, extending their longevity.

Q: What is the recommended preparation procedure for Carbon Flex application?

A: For best results, wash and clay bar your car, then use a panel prep on the paint before applying Carbon Flex.

Q: How long does Carbon Flex take to dry?

A: The minimum cure time is 12 hours, but 24 hours is optimal. Applying our ceramic product over Carbon Flex can reduce this to 4 hours.

Q: Can UV lights be used to accelerate the curing process?

A: There's no need for UV lights, as the product is formulated to cure without them.

Q: Is Carbon Flex suitable for use on an RV?

A: : Yes, but for best results on a Carbon Pro is recommended.

Q: Can I use Carbon Flex on a boat?

A: Yes, but for best results on a boat, Carbon Pro is recommended.