Carbon Flex Instructions:

Carbon Flex has 3 steps for application:

• Prep
• Apply
• Cure

We'll dive into the details of each.  Please follow along and for any questions reach out to support@getnexgen.com

Great Results come from great preparation!

While Carbon Flex truly is flexible with its application  requirements, let’s talk about why we recommend  going the extra mile with your surface prep: 

Carbon Flex adheres directly to your vehicle’s  clearcoat, and the more pure and uncontaminated  the clearcoat is, the more effectively Carbon Flex  can bond. All vehicles, even factory-new, have  micro-cracks and pores that a regular wash just  can’t reach. When you combine washing with a clay  bar detail and our Panel Prep, you create the optimal  surface for Carbon Flex to bond with.  

Maximizing the bonding power will add years to your  ceramic coating, and will make the visible results  even more stunning. 

Prep 

Great results come from great preparation! 

1. Wash your vehicle with high-quality auto soap to  ensure thorough cleaning. Rinse completely with  fresh water until there is no soap left on the vehicle.  Fully dry vehicle to avoid water spots. 

Optional steps for best results: 

2. Remove any contaminants or paint imperfections  with a clay bar detail or paint correction process,  depending on the severity of damage.  

3. Use Nexgen Panel Prep or other paint  decontaminator as the final step in preparing your  vehicle’s surface. This will remove any leftover  waxes, sealants, or glazes.  

Apply 

Note: Multiple clean, dry microfiber towels will be necessary  for a proper and effective application process. We always  recommend using gloves while applying Carbon Flex. 

1. Pour 15-20 drops of Carbon Flex evenly onto the  applicator pad.  

2. Apply the coating evenly to one panel section at  a time using a crosshatch/back-and-forth motion.  Ensure a relatively thick coating and 100% coverage.  3. Let the product sit for 2-4 minutes to allow proper  bonding and adherence.  

4. Use a clean, dry microfiber towel to wipe off any  excess product. Use the palm of your hand to hold  the towel completely flat against the panel.  5. Using a separate microfiber towel, buff out any  remaining product and perfect the surface finish.  6. Repeat these steps panel by panel until the entire  vehicle is coated, excess product is removed, and the  finish is buffed out.  

Cure 

To double the lifespan of your coating, apply Nexgen  Ceramic Spray as a topper 45-75 minutes after  application of Carbon Flex. 

Avoid contact with water for at least 24 hours. Avoid contact with any chemical, cleaner, or soap for  at least 14 days. 

If cleaning is necessary, use Nexgen Ceramic  Spray as a stand-in cleaner. It will effectively lift  contaminants as well as re-fill any pores with high quality ceramic. 

Maintenance + Tips 

1. Apply Nexgen Ceramic Spray as a topcoat at least  twice a year for best results. This will fill any pores  or scratches on the coating with more ceramic,  rebuilding and reinforcing your coating in one step.  2. Avoid going to automatic or “no-touch” car  washes. Poor brush maintenance and low-quality or  overly intense soaps may shorten the lifespan of your  coating. 

3. Use Nexgen Ceramic Soap for car washes. It’s  pH-balanced, concentrated, and infused with silicon  dioxide so it replenishes your protective ceramic  barrier while also offering a safe and effective wash. 

Thanks for choosing Nexgen Carbon Flex, we know  you’re going to love it! 

NEXGEN CARBON FLEX SAFETY WARNINGS 

Danger! Highly flammable liquid and vapor. Harmful If swallowed.  Harmful when in contact with skin. Causes serious eye irritation. Toxic  to aquatic life. May cause damage to organs through prolonged or  repeated exposure. 

GENERAL

Read label before use. If medical advice is  needed, have product label on hand. Keep out of reach of children. Wash hands after handling. Do not eat, drink, or  smoke while using this product.  

PREVENTION

Wash hands thoroughly after handling.  Keep away from heat/sparks/open flame/hot surfaces. NO  SMOKING. Keep container tightly closed. Take precautionary  measures against static discharge. Avoid breathing dust/ fumes/spray. Do not get in eyes, on skin, or clothing. Use  only outdoors or in a well-ventilated area. Wear protective  gloves/clothing/eyewear/face wear. 

RESPONSE

If contact is made with skin, gently wash with soap and water. If skin irritation occurs, get medical  attention.

If inhaled: move to fresh air, rest in a comfortable  breathing position. If swallowed: call poison control or  doctor. Rinse mouth, do not induce vomiting. If in eyes:  rinse thoroughly with water. If irritation or redness persists,  seek medical attention.  

STORAGE

Store in a dry, well-ventilated place. Store in  closed container and keep tightly closed. 

DISPOSAL

Dispose of contents/container in accordance  with local/regional/national/international regulations.