Bug and Tar Remover
For best results, make sure the surface is cool to touch and is wet.
Apply to inconspicuous area
Apply to the desired area and let sit for 20-30 seconds.
Agitate with a clean wet towel or sponge if necessary.
Fully flush area with clean water after application.
Continue the process until the area is clean or desired results are achieved.
* Never apply to dry/hot painted surface
- Can be used on vinyl, paint, plastic, glass
- Can also be used to remove adhesive
- When in doubt, try an inconspicuous area first.
- This is a mild degreaser
- DO NOT USE ON MATTE FINISH
Area should be wet because if the paint is hot it can stain the clear coat.