Do not apply in direct sunlight. Do not use on hot surfaces.
Please make sure the surface is clean with no debris before using.
- Apply a dime sized amount to applicator pad or microfiber towels.
- Apply with very light pressure in a back and forth motion.
- Use a dry microfiber towel to remove excess residue.
- Repeat steps 1-3 until desired results are achieved.
PRO TIPS:
Using too much or moving in circular motions can cause more micro scratches.
Pressing too hard can cause the paint to dull or even secondary light scratches. Should you cause slight scratches a polish will be needed after that to re-finish the paint.
Please note deep cuts and scratches might need professional level compounds. See our pro-line products for a product more suited to your needs.
If your fingernail catches on the scratch, the scratch is too deep for this product. Use a different compound.
Dirty vehicles can cause scratching of the paint.
AVOID MATTE FINISHES
This cant be used on gel coats like found on RVs and boats. Due to the hardness of the gel coat, you may need to slightly apply a little more pressure and/or slightly more product to achieve desired results.